HOW TO USE WITH ICE PACK

วิธีการใช้งานด้วย 3 องค์ประกอบของ KeepKool
การใช้งานบนรถแห้งที่สามารถประยุกต์ให้ KeepKool รักษาอุณหภูมิสินค้าได้ 2 อุณหภูมิ ( Chilled & Frozen ) โดยที่ภายในรถคันเดียวกันนั้นยังสามารถขนส่งสินค้าแห้งได้อีกด้วย เพราะฉะนั้นภายในรถคันเดียวกันสามารถขนส่งสินค้าได้ 3 อุณหภูมิ

STEP 1

Pre-Cool

Before using the Ice Pack, inspect them to make sure there is no leaking, and the ice pack is fully frozen. You can tell by looking at the Ice Pack, if you cannot see through the Ice Pack that means it is ready to use. Comprise the ice pack into your prefer packaging product at least one hour before performing your delivery to pre-cool the cooling container.

** In the case of Chilled Ice pack, limited number of Ice Pack is needed in the process. **

image

STEP 2

image

Contain the Ice Pack refer to the duration usage.

After the first step where we pre-cool the container for an hour, replace the Ice Pack inside the container with the new Ice Pack from Eutectic Plate freezer. This will restart the cooling cycle, and it can be use for a longer duration. In case of chilled Ice Pack, do not need to change ice packs, but limited number of Ice pack still required.

STEP 3

Packaging

After replacing your Ice Pack, fill up the container with your product to keep cool. Carefully check the container to make sure it is fully closed before moving the container into your vehicle for delivery.

image

STEP 4

image

Delivery

Between every delivery, each time the container is open, will increase the internal temperature of the container. Do not open the container for 30 seconds or longer, and you can still keep your product in good condition.

STEP 5

restart the cold chain

After your delivery, place your Ice pack back into Eutectic Plate Freezer to refreeze for the next delivery. Clean the container with clean water or towel.

image
Powered by MakeWebEasy.com